Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

Cobalt-Catalyzed Regio- and Stereoselective Hydroboration of Allenes

An efficient pincer-ligand-based cobalt-complex-catalyzed allene hydroboration affording Z-allylic boronates is described. The reaction demonstrates an excellent regio- as well as Z-stereoselectivity and a wide substrate scope that tolerates many functional groups. Based on solvent-assisted electrospray ionization mass spectrometry (SAESI-MS) studies, a rationale for the cobalt-catalyzed hydroboration involving the highly selective insertion of an allene into the Co−H bond to form Z-allylic cobalt intermediates is proposed.     

Sample preparation for mass spectrometry imaging of leaf tissues: a case study on analyte delocalization

Analytical and Bioanalytical Chemistry - Appropriate sample preparation is pivotally important to obtain high-quality mass spectrometry imaging (MSI) data. Unlike mammalian tissues, preparation of...     

Graph-Theoretical Method to the Existence of Stationary Distribution of Stochastic Coupled Systems

In this paper, by linking Fokker–Planck equations with stochastic coupled systems, a new method is provided to investigate the existence of a stationary distribution of stochastic coupled systems. Based on the graph theory and the Lyapunov method, an appropriate Lyapunov function associated with stationary Fokker–Planck equations is constructed. Moreover, a Lyapunov-type theorem and a coefficients-type criterion are obtained to guarantee the existence of a stationary distribution. Furthermore, theoretical results are applied to explore the existence of a stationary distribution of stochastic predator–prey models with dispersal and a sufficient criterion is presented correspondingly. Finally, a numerical example is given to illustrate the effectiveness of our results.     

In Situ Electropolymerization Enables Ultrafast Long Cycle Life and High-Voltage Organic Cathodes for Lithium Batteries

Organic cathode materials have attracted extensive attention because of their diverse structures, facile synthesis, and environmental friendliness. However, they often suffer from insufficient cycling stability caused by the dissolution problem, poor rate performance, and low voltages. An in situ electropolymerization method was developed to stabilize and enhance organic cathodes for lithium batteries. 4,4′,4′′-Tris(carbazol-9-yl)-triphenylamine (TCTA) was employed because carbazole groups can be polymerized under an electric field and they may serve as high-voltage redox-active centers. The electropolymerized TCTA electrodes demonstrated excellent electrochemical performance with a high discharge voltage of 3.95 V, ultrafast rate capability of 20 A g⁻¹, and a long cycle life of 5000 cycles. Our findings provide a new strategy to address the dissolution issue and they explore the molecular design of organic electrode materials for use in rechargeable batteries.     

CsVO2F(IO3): An Excellent SHG Material Featuring an Unprecedented 3D [VO2F(IO3)]− Anionic Framework

The first alkali-metal vanadium iodate fluoride, CsVO₂F(IO₃), with a novel 3D anionic framework, has been rationally designed and hydrothermally synthesized. The 3D [VO₂F(IO₃)]⁻ framework in CsVO₂F(IO₃) is built from 0D Λ-shaped cis-[VO₃F(IO₃)₂]⁴⁻ polyanions via corner-sharing of oxo anions and bridging of the iodate groups. CsVO₂F(IO₃) displays both a strong second-harmonic generation (SHG) 1.1 times as strong as KTiOPO₄ (KTP) under 2.05 μm laser radiation and high laser-induced damage threshold (LIDT) of 107.9 MW cm⁻². This work provides a new route to design SHG crystals with stable 3D anionic structures from low-dimensional structural building units.     

Crystal phase control in two-dimensional materials

It is the nature of crystals to exist in different polymorphs. The recent emergence of two-dimensional (2D) materials has evoked the discovery of a number of new crystal phases that are different from their bulk structures at ambient conditions, and revealed novel structure-dependent properties, which deserve in-depth understanding and further exploration. In this contribution, we review the recent development of crystal phase control in 2D materials, including group V and VI. transition metal dichalcogenides (TMDs), group IVA metal chalcogenides and noble metals. For each group of materials, we begin with introducing the various existing crystal phases and their structure-related properties, followed by a detailed discussion on factors that influence these crystal structures and thus the possible strategies for phase control. Finally, after summarizing the whole paper, we present the challenges and opportunities in this research direction.     

Adaptive controller design for a switched model of air-breathing hypersonic vehicles

Since most of the control strategies for air-breathing hypersonic vehicles (AHVs) concentrate on the control-oriented models built at/around a specific working point, it is somewhat hard to extend them to the broader flight envelop. Aiming at the above deficiency, this paper formulates the dynamics of AHVs as several sub-models, which switch to each other in accordance with the flight condition and make up of the control-oriented switched model (COSM). With the aid of the COSM, two adaptive tracking controllers are proposed for the purposes of velocity tracking and altitude tracking, sequentially. By utilizing neural networks and designing robust control laws, the possible changes on the force and moment coefficients in the COSM are successfully handled. The time-varying inertia parameters of AHVs are also considered at design level. It is worth emphasizing that while this strategy is developed based on a switched model, the resulting control algorithm is continuous with no connection to the switching signal. Analysis indicates that both velocity and altitude tracking errors remain small within the whole flight envelop, which is further confirmed by a simulation study.     

Photocatalytic Cr(VI) sequestration and photo-Fenton bisphenol A decomposition over white light responsive PANI/MIL-88A(Fe)

Polyaniline (PANI)/MIL-88A(Fe) (Px@M88) composites were constructed through a simple one-pot hydrothermal method. The photocatalytic and photo-Fenton activities of Px@M88 composites toward reduction of Cr(VI) and degradation organic pollutants were explored by white light irradiation. PANI, as a conductive polymer, can improve MIL-88A(Fe)’s conductivity and the efficiency of photogenerated e⁻–h⁺ pair separation. In the presence of H₂O₂, a photo-Fenton reaction occured to boost the degradation efficiency of organic pollutants like bisphenol A. In addition, P9@M88 showed excellent recycling and stability in cycling experiments. Finally, a possible reaction mechanism for photocatalytic degradation was proposed and verified by X-ray photoelectron spectroscopy and electron spin resonance determination and electrochemical characterizations.     

o-Trityl phenoxy-imino vanadium (III) complexes: synthesis,characterization, and catalysis on ethylene (co)polymerization

Several phenoxy-imine ligands bearing o-trityl group in phenoxy moiety RN=CHArOH (Ar = C₆H₂(CPh₃)^tBu, R = 2,6-Me₂C₆H₃ ( L ₁ H ); 2,6-ⁱPr₂C₆H₃ ( L ₂ H ); 3,5-(CF₃)₂C₆H₃ ( L ₃ H ); 3,5-(OMe)₂C₆H₃ ( L ₄ H ); CHPh₂ ( L ₅ H ); CPh₃ ( L ₆ H )) were synthesized and characterized by¹H NMR and ¹³C NMR spectroscopy. The vanadium complexes based on these ligands LVCl₂(THF)₂ ( 1–6 ) were synthesized via conventional transmetalation reaction in moderate to high yields. Complexes 1–6 were fully characterized by FT-IR, elemental analyses and the molecular structures of 1 , 2 ·H₂O, (2 ·H₂O ) ₂ (μ-Cl) ₂ , 4 , and 5 were confirmed by X-ray crystallographic analysis in which the six-coordinated vanadium centers are in a typical octahedral geometry. Upon activation with Et₂AlCl in toluene, complexes 1–6 showed high activities in ethylene polymerization affording polymers with moderate molecular weight (5.9–11.8 × 10⁴ Da). Moreover, in hexane or CH₂Cl₂, 1–6 /Et₂AlCl exhibited enhanced activities. When activated with MAO or MMAO in toluene, these complexes showed relatively low activities but afforded polymers with ultra-high molecular weight (up to 3.30 × 10⁶ Da). 1–6 /Et₂AlCl also showed high activities in ethylene/1-hexene copolymerization at room temperature giving moderate molecular-weight polymers (6.5–11.4 × 10⁴ Da) with co-monomer incorporation being of 6.0 ~ 7.8%.